(888) 979-5190 Toll-Free
Aircel AG9934740 IDI_248

Aircel AEHD-250 Heated Desiccant Air Dryers

Aircel AG9934740 Externally Heated Desiccant Air Dryer, 1-1/2 in Inlet Connection, 250 scfm Air, -40 deg F Dew Point

Aircel AG9934740 Externally Heated Desiccant Air Dryer, 1-1/2 in Inlet Connection, 250 scfm Air, -40 deg F Dew Point AG9934740

The AEHD Series is an externally heated desiccant air dryer with mid-bed energy management based on relative humidity and a purge flow rate of 8% (6% with venturi option). High temperature paint, heater vessel and hot purge piping with insulation and aluminum jacket protects personnel and prevents heat loss. High efficiency, mounted pre-filter with zero loss drain and differential pressure gauges and after filter.
Aircel Externally Heated Desiccant Air Dryer, 1-1/2 in Inlet Connection, 100 deg F Inlet Air Temperature, Air Flow Rate: 250 scfm, 100 psig Air Pressure,-40 deg F Dew Point Temperature, 100 deg F Maximum Temperature, Carbon Steel Housing, Activated Alumina Desiccant, 87 in Overall Height, 58 in Overall Width, 44 in Overall Depth

Air Flow Rate      :      250 scfm
Air Pressure      :      100 psig
Desiccant Material      :      Activated Alumina
Dew Point Temperature      :      -40 deg F
Housing Material      :      Carbon Steel
Inlet Air Temperature      :      100 deg F
Inlet Connection Size      :      1-1/2 in
Maximum Temperature      :      100 deg F
Overall Depth      :      44 in
Overall Height      :      87 in
Overall Width      :      58 in
  • Remote start/stop control
  • Stainless steel desiccant sukports and air diffusers to prevent channeling
  • Counter current regeneration, up flow drying and down flow depressurization
  • 3/16 in premium-grade F200 activated alumina high capacity desiccant for pressure dew point performance
  • Easy installation with single point connection for electrical supply power and inlet/outlet air connections
  • Dry relay alarms for remote indication of system alarms
  • Standard energy management system
  • Adjustable (5 and 10 min) NEMA cycle
  • Standard communication through RS-232/RS-485 combo port
  • Each dryer equipped with mounted coalescing filter and desiccant dust after filter
  • NEMA 4 controls standard
  • pdfCatalog https://assets.unilogcorp.com/267/ITEM/DOC/Aircel_AG9935140_Catalog.pdf
  • pdfInstruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/Aircel_AG9935140_Instruction_Installation_Manual.pdf
  • pdfTechnical Drawing https://assets.unilogcorp.com/267/ITEM/DOC/Aircel_AG9934740_Technical_Drawing.pdf