Apollo® Valves 40-700 Series 40-700-C3 Reduced Pressure Principle Detector Assembly, 3 in Nominal, 175 psi Pressure
Apollo® Valves 40-700 Series 40-700-C3 Reduced Pressure Principle Detector Assembly, 3 in Nominal, 175 psi Pressure 40-700-C3The 3 to 10 in reduced pressure principle (RP) detector assembly shall be an Apollo® model RPDA40. This valve shall be manufactured in America. The epoxy-coated ductile iron body shall be configured with individually accessible check valves and top-mounted test cocks. The bypass RP shall be bronze with top access check valves with top-mounted test cocks. Both RP relief valves shall be positioned at the bottom of their respective assemblies with separate center access covers. The seat rings shall be replaceable and the reversible seat discs shall be silicone rubber. The Apollo® domestic ball valve test cocks shall have stainless steel handles. The assembly shall prevent contamination of the potable water supply due to back siphonage or backpressure from substances that are health or non-health hazards. The assembly will accurately measure all flows up to 3 gpm through the metered bypass line. The pressure drop across the assembly shall be documented by USC's FCCC&HR approval curves.
Apollo® Valves Reduced Pressure Principle Detector Assembly, Series: 40-700 Series, 3 in Nominal, OS&Y Flange Connection, 175 psi, Water Media, 38-5/16 in Inlet to Outlet Length, Ductile Iron Body, Epoxy-Coated, 33 to 140 deg F, 28-3/8 in H, Domestic/Import: Domestic
Body Material | : | Ductile Iron |
Connection Type | : | OS&Y Flange |
Dimensions | : | 28-3/8 in H |
Domestic/Import | : | Domestic |
Finish | : | Epoxy-Coated |
Inlet to Outlet Length | : | 38-5/16 in |
Media | : | Water |
Nominal Size | : | 3 in |
Pressure Rating | : | 175 psi |
Series | : | 40-700 Series |
Temperature Rating | : | 33 to 140 deg F |