(888) 979-5190 Toll-Free
Apollo® Valves 83B-445-04 83B-445-04

Apollo Valves 83B-445-04 3-Piece Ball Valve

Apollo® Valves 83B-440 Series 83B-445-04 3-Piece Ball Valve, 1 in Nominal, Butt Weld Connection, 250 psig Pressure

Apollo® Valves 83B-440 Series 83B-445-04 3-Piece Ball Valve, 1 in Nominal, Butt Weld Connection, 250 psig Pressure 83B-445-04

Apollo® Valves 3-Piece Ball Valve, Series: 83B-440 Series, 1 in Nominal, Butt Weld Connection, Full Port, 250 psig, 600 lb Pressure Class, Gas, Water Media, Lever Actuator, 1 in Orifice, 5.19 in Inlet to Outlet Length, 4.8 in Top to Inlet Center, 2 Positions, 68 Cv Flow Coefficient (Cv), ASTM A276, ASTM A193, ASTM A194, ASTM A216 Material Standard, Carbon Steel Body, 316 Stainless Steel Stem, Stainless Steel Trim, PTFE Packing, Stainless Steel Handle, 316 Stainless Steel Ball, PTFE Softgoods, Domestic/Import: Domestic

Actuator Type      :      Lever
Ball Material      :      316 Stainless Steel
Body Material      :      Carbon Steel
Connection Type      :      Butt Weld
Domestic/Import      :      Domestic
Flow Coefficient (Cv)      :      68 Cv
Handle Material      :      Stainless Steel
Inlet to Outlet Length      :      5.19 in
Material Standard      :      ASTM A276, ASTM A193, ASTM A194, ASTM A216
Media      :      Gas, Water
Nominal Size      :      1 in
Number of Positions      :      2
Orifice Size      :      1 in
Packing Material      :      PTFE
Port Type      :      Full
Pressure Class      :      600 lb
Pressure Rating      :      250 psig
Series      :      83B-440 Series
Softgoods Material      :      PTFE
Stem Material      :      316 Stainless Steel
Top to Inlet Center      :      4.8 in
Trim Material      :      Stainless Steel
  • Three-piece construction with enclosed fasteners
  • Stainless steel trim and hardware
  • Swing-out center section
  • Pressure balanced solid ball
  • Compression controlled spiral wound gaskets
  • Anti-blowout one-piece bottom entry stem
  • Two-position locking
  • Adjustable multi-piece PTFE "V" style packing
  • Fully machined ISO 5211 mounting
  • Cast bosses on the center section and end caps for bleed and drain ports
  • SCH 10
  • 2-1/4 in stem extension
  • pdfInstruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/Apollo_Valves_83A_143_P01_Instruction_Installation_Manual.pdf
  • pdfLine Drawing https://assets.unilogcorp.com/267/ITEM/DOC/Apollo_Valves_83A_143_P01_Line_Drawing.pdf
  • pdfSpecification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Apollo_Valves_83B_445_04_Specification_Sheet.pdf