(888) 979-5190 Toll-Free
Apollo® Valves 86A-205-0415 86A-205-0415

Apollo Valves 86A-205-0415 3-Piece Ball Valve

Apollo® Valves 86A-205-0415 3-Piece Ball Valve, 1 in Nominal, Socket Weld Connection, 150 psig, 1500 psig Pressure

Apollo® Valves 86A-205-0415 3-Piece Ball Valve, 1 in Nominal, Socket Weld Connection, 150 psig, 1500 psig Pressure 86A-205-0415

Apollo® Valves 3-Piece Ball Valve, Series: 86A-200 Series, 1 in Nominal, Socket Weld Connection, Full Port, 150 psig, 1500 psig, Gas, Water Media, Round Wheel Actuator, 1 in Orifice, 4.19 in Inlet to Outlet Length, 4.8 in Top to Inlet Center, 2 Positions, 68 Cv Flow Coefficient (Cv), ASTM A276, ASTM A351-CF8M, ASTM A351-CF3M Material Standard, Stainless Steel Body, 316 Stainless Steel Stem, Stainless Steel Trim, PTFE Packing, Stainless Steel Handle, 316 Stainless Steel Ball, RPTFE Softgoods, Lead-Free, Domestic/Import: Domestic

Actuator Type      :      Round Wheel
Ball Material      :      316 Stainless Steel
Body Material      :      Stainless Steel
Connection Type      :      Socket Weld
Domestic/Import      :      Domestic
Flow Coefficient (Cv)      :      68 Cv
Handle Material      :      Stainless Steel
Inlet to Outlet Length      :      4.19 in
Lead-Free/Contains Lead      :      Lead-Free
Material Standard      :      ASTM A276, ASTM A351-CF8M, ASTM A351-CF3M
Media      :      Gas, Water
Nominal Size      :      1 in
Number of Positions      :      2
Orifice Size      :      1 in
Packing Material      :      PTFE
Port Type      :      Full
Pressure Rating      :      150 psig, 1500 psig
Series      :      86A-200 Series
Softgoods Material      :      RPTFE
Stem Material      :      316 Stainless Steel
Top to Inlet Center      :      4.8 in
Trim Material      :      Stainless Steel
  • Three-piece construction with enclosed fasteners
  • Stainless steel trim and hardware
  • Swing-out center section
  • Pressure balanced solid ball
  • Compression controlled RPTFE gaskets
  • Anti-blowout one-piece bottom entry stem
  • Two-position locking
  • Adjustable multi-piece PTFE "V" style packing
  • Fully machined ISO 5211 mounting
  • Cast bosses on the center section and end caps for bleed and drain ports
  • 2-1/4 in stem extension and balancing stop
  • pdfInstruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/Apollo_Valves_86A_103_T01_Instruction_Installation_Manual.pdf
  • pdfLine Drawing https://assets.unilogcorp.com/267/ITEM/DOC/Apollo_Valves_86A_103_T01_Line_Drawing.pdf
  • pdfSpecification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Apollo_Valves_86A_203_01_Specification_Sheet.pdf