(888) 979-5190 Toll-Free
ASCO 8221G003HW 8221G003HW

ASCO 8221G003HW Pilot Solenoid Valve

Asco 8221 8221G003HW Pilot Solenoid Valve, 1/2 in Nominal, NPT Connection, 2-Ports/Ways, 3 cu-m/hr, 150 psi Pressure

Asco 8221 8221G003HW Pilot Solenoid Valve, 1/2 in Nominal, NPT Connection, 2-Ports/Ways, 3 cu-m/hr, 150 psi Pressure 8221G003HW

The ASCO 221 Series, with its unique slow closing design, provides higher flow while increasing throughput in commercial applications. It reduces inventory by accommodating both hot and cold water service and is designed for quick, easy maintenance. Apply the 221 Series with confidence in high and low temperature applications found in laundries, molding, sterilizers and autoclaves.
ASCO Pilot Solenoid Valve, Series: 8221, Nominal Size: 1/2 in, NPT Connection, Configuration: NC, 150 psi Pressure, 3 cu-m/hr Flow Rate, Media: Hot Water, Orifice Size: 9/16 in, Inlet to Outlet Length: 2.71 in, Top to Inlet Center: 3.56 in, 120 VAC, Amperage Rating: 16 VA, 6.1 W Power, 60 Hz Frequency, Coil Insulation Class: FT, 2 Positions, Number of Ports/Ways: 2, Brass Body, EPDM Seat, Disc Material: NBR, Softgoods Material: Copper/Stainless Steel, 32 to 210 deg F, 4.32 in H x 3.45 in W Dimensions

Amperage Rating      :      16 VA
Body Material      :      Brass
Coil Insulation Class      :      FT
Configuration      :      NC
Connection Type      :      NPT
Dimensions      :      4.32 in H x 3.45 in W
Disc Material      :      NBR
Flow Rate      :      3 cu-m/hr
Frequency Rating      :      60 Hz
Inlet to Outlet Length      :      2.71 in
Media      :      Hot Water
Nominal Size      :      1/2 in
Number of Ports/Ways      :      2
Number of Positions      :      2
Orifice Size      :      9/16 in
Power Rating      :      6.1 W
Pressure Rating      :      150 psi
Seat Material      :      EPDM
Series      :      8221
Softgoods Material      :      Copper/Stainless Steel
Temperature Rating      :      32 to 210 deg F
Top to Inlet Center      :      3.56 in
Voltage Rating      :      120 VAC
  • A specially designed snubber offers slower disc closing speed to protect systems against water hammer damage
  • Pressure spike due to water hammer is reduced to a point eliminating the need for suppressors or other controls in most water systems
  • Hot water service to 150 psi (10 bar) differential at 210 deg F (100 deg C)
  • Pilot operated, normally open or normally closed models are available with a full range of pipe sizes up to 2-1/2 in
  • pdfCatalog https://assets.unilogcorp.com/267/ITEM/DOC/Asco_8221G003HW_Catalog.pdf