(888) 979-5190 Toll-Free
ASCO EF8316G054 EF8316G054

ASCO EF8316G054 Pilot Solenoid Valve

Asco 316 EF8316G054 Pilot Solenoid Valve, 3/8 in Nominal, NPT Connection, 3-Ports/Ways, 2.1 cu-m/hr, 120 deg F

Asco 316 EF8316G054 Pilot Solenoid Valve, 3/8 in Nominal, NPT Connection, 3-Ports/Ways, 2.1 cu-m/hr, 120 deg F EF8316G054

The ASCO 316 Series is a line of high flow, general service solenoid valves, which can be used to pilot large actuators and provide quick closing of large control valves. The diaphragm poppet design is suitable for controlling air, inert gas and liquids. Its resilient seating achieves tight shut-off.
ASCO Pilot Solenoid Valve, Series: 316, Nominal Size: 3/8 in, NPT Connection, Configuration: NC, 125 psi, 150 psi Pressure, 2.1 cu-m/hr Flow Rate, Media: Air, Inert Gas, Water, Orifice Size: 5/8 in, Inlet to Outlet Length: 2.76 in, Top to Inlet Center: 3.94 in, 24 VDC, 10.6 W Power, Coil Insulation Class: FT, 2 Positions, Number of Ports/Ways: 3, Brass Body, NBR Seat, Seal Material: NBR, Disc Material: NBR, Softgoods Material: CA/Copper/Stainless Steel, 120 deg F, 5.08 in H Dimensions

Body Material      :      Brass
Coil Insulation Class      :      FT
Configuration      :      NC
Connection Type      :      NPT
Dimensions      :      5.08 in H
Disc Material      :      NBR
Flow Rate      :      2.1 cu-m/hr
Inlet to Outlet Length      :      2.76 in
Media      :      Air, Inert Gas, Water
Nominal Size      :      3/8 in
Number of Ports/Ways      :      3
Number of Positions      :      2
Orifice Size      :      5/8 in
Power Rating      :      10.6 W
Pressure Rating      :      125 psi, 150 psi
Seal Material      :      NBR
Seat Material      :      NBR
Series      :      316
Softgoods Material      :      CA/Copper/Stainless Steel
Temperature Rating      :      120 deg F
Top to Inlet Center      :      3.94 in
Voltage Rating      :      24 VDC
  • Low power version has a molded one piece solenoid with a highly efficient solenoid cartridge and special low wattage coil, handles ambient temperatures up to 175 deg F (80 deg C), designed for use in plant control automation to provide PLC compatibility
  • Zero minimum differential version features a brass body for general atmospheres and a stainless steel body for corrosive environments
  • Intrinsically safe version is designed solely for installation in intrinsically safe or NIFW areas with properly approved and sized limiting barriers
  • A full range of globally approved explosion-proof enclosures are available with this series
  • pdfCatalog https://assets.unilogcorp.com/267/ITEM/DOC/Asco_8316G064_Catalog.pdf
  • pdfInstruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/Asco_8316G064_Instruction_Installation_Manual.pdf