Champion CL50-0C-G00 Lubricator 2" NPT (1186 SCFM)

As the air flows through the lubricator, some of the incoming air passes through the bowl pressure control valve and then pressurizes the bowl pushing oil upward through the siphon tube. Most of the air flow passes through the self-adjusting Flow-Guide flow sensor in the lubricator throat creating a slight pressure drop that is proportional to the rate of air flow. This forces oil to flow upward through the siphon tube into the sight dome where it drips into a nozzle passage and then into the lubricator throat.The precise amount of oil to be delivered to the air stream is determined by the oil adjusting needle valve that sets the exact drip rate. The oil drops are atomized by the high velocity air flowing through the lubricator. All of the drops visible in the sight dome are delivered downstream to the air devices.The self-adjusting flow sensor automatically maintains a constant oil-to-air ratio by opening and closing in response to a wide range of changing air flows. A check valve keeps the siphon tube full of oil during periods of no flow.
ISS is an independent supplier of aftermarket replacement parts and is not affiliated with manufacturers mentioned in this listing. Original equipment manufacturer (OEM) names are the trademarks of each manufacturer. On products marked "equivalent", "replacement", or "aftermarket", OEM names and part numbers are for reference only.

• Meets Or Exceeds OEM Specifications
• Cost Effective Solution To OEM Parts
• Using Aftermarket Parts Will Not Void Your Warranty
• OEM Names And Part Numbers Are For Reference Only