Cutler-Hammer 47A4446G37 Handle Mechanism

General purpose vari-depth handle mechanisms are suitable for use with Type 1 fabricated enclosures. They are designed for use with breakers or disconnect switches when used in deep enclosures. Required for a standard application are a padlockable operating handle, a shaft and a mechanism. Two variable depth shafts are offered to better cover the wide range of depths of various enclosures, these are referred to in the table as the standard and the long shaft. The dimensions for panel depth given in the following table are from the mounting surface of the breaker or the disconnect to the inside of the enclosure cover. Standard mechanisms do not include an internal lockoff device. Mechanisms with this feature are, however, offered as an optional item. The internal lockoff provides a means of padlocking the breaker or the switch in the OFF position while the enclosure door is open. The adapter bushing, a component of the special handle kit, may be ordered separately.

• G37 rotary lever handle

• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Cutler_Hammer_47A4446G37_Specification_Sheet.pdf
• Warranty Information https://assets.unilogcorp.com/267/ITEM/DOC/Cutler_Hammer_47A4446G37_Warranty.pdf