(888) 979-5190 Toll-Free
Deltech® DF20-E-3-D IDI_174951

Deltech DF20-E-3-D Mechanical Separator Assembly 20 SCFM, 3/8" NPT

Deltech® DF20-E-3-D Mechanical Separator With Internal Automatic Drain, 8.15 in OAH, 3/8 in Port, FNPT Connection

Deltech® DF20-E-3-D Mechanical Separator With Internal Automatic Drain, 8.15 in OAH, 3/8 in Port, FNPT Connection DF20-E-3-D

Dirt, rust, pipe scale, water and lubricant are all by products of compressed air generation. Left unfiltered, this abrasive stream of contaminants will compromise the operation, integrity and usable service life of pneumatically powered operations. Unnecessary wear and tear artificially inflates operating costs, adds to product rejects and wastes countless hours on unscheduled equipment maintenance. Furthermore, the presence of oily water dilutes the effectiveness of in-line oil lubricators. Combined, these unwanted contaminants bind valves and motion control devices, corrode air motors and contaminate finished goods.
Deltech® Water Separator With Internal Automatic Drain, Series: DF Series, 3/8 in Port, FNPT Connection, 20 scfm Flow Rate, 250 psig Pressure, Aluminum/Steel/Zinc Filter, Filter Rating: 10 um, 150 deg F, Chrome/Epoxy Powder-Coated, 4.13 in Overall Width, 8.15 in Overall Height

Connection Type      :      FNPT
Filter Material      :      Aluminum/Steel/Zinc
Filter Rating      :      10 um
Finish      :      Chrome/Epoxy Powder-Coated
Flow Rate      :      20 scfm
Overall Height      :      8.15 in
Overall Width      :      4.13 in
Port Size      :      3/8 in
Pressure Rating      :      250 psig
Series      :      DF Series
Temperature Rating      :      150 deg F
  • Dual gauge face allows housings to be mounted in any flow direction
  • Indicates element change out based on differential pressure
  • Large easy to read gauge face
  • Audible warning by escaping air if housing is not depressurized before disassembly
  • Ribbed bowls allow use of C-spanner
  • Color-coded elements for easy identification
  • Large flow paths reduce pressure drop
  • Chromated and epoxy powder painted (interior and exterior) add durability and corrosion resistance
  • Can be mounted for left or right entry
  • High quality aluminum, zinc and steel materials
  • Three modes determine element change - time, differential pressure, element performance
  • Changes color based on differential pressure
  • Large effective surface areas ensure high capture rates
  • Large open areas minimize pressure drop
  • Silicone-free, withstand temperatures to 150 deg F
  • Push-on elements for quick replacement
  • Corrosion-resistant, stainless steel cores
  • Reliable discharge of condensate
  • Viton seals and inlet screen for additional protection
  • pdfCatalog https://assets.unilogcorp.com/267/ITEM/DOC/Deltech_DF100_A_6_DG_Catalog.pdf