Deltech RP-3200 Heated Desiccant Air Dryer

Deltech® RP-3200 Heated Purge Desiccant Air Dryer, 6 in Inlet Connection, 6 in Outlet Connection, 3200 scfm Air

Deltech® RP-3200 Heated Purge Desiccant Air Dryer, 6 in Inlet Connection, 6 in Outlet Connection, 3200 scfm Air RP-3200

Deltech® RP Series dryers will produce the design dew point while operating continuously at maximum rated flow (100% duty cycle) at CAGI ADF 200 inlet standards of 100 deg F inlet temperature and 100% relative humidity at 100 psig. Designed for applications that were previously forced to accept a 40 deg F pressure dew point when simple protection against seasonal freezing is the issue. The standard design delivers ISO 8573.1 dew points between class 2 and class 3 automatically. class 2 (40 deg F) dew points protect against freezing during low ambient conditions and class 3 (4 deg F) dew points keep your air system bone dry during the heat of summer. Applications that require class 2 (-40 deg F) dew points year round simply need to select the Free Air (FA) super charger option package. The EMS uses rugged temperature and humidity-sensing technology that does not require calibration. Constant desiccant bed monitoring ensures stable dew point control. Algorithm-based A3 Purge Technology™ controls precisely engage the FA super charger when needed to manage the bed regeneration cycles and boost the airflow through the tower. Compressed purge air volume is reduced, further optimizing energy conservation. An RP Series dryer with an EMS package may enable the use of a smaller air compressor. Total system efficiency would then be superior due to the linear energy saving potential of the dryer. Purge air savings of up to 15% are possible in direct proportion to demand when compared to typical heatless designs. Consistent -40 deg F pressure dew points and fast returns-on-investment are automatic year round.
Deltech® Heated Purge Desiccant Air Dryer, 6 in Inlet Connection, 6 in Outlet Connection, 40 to 120 deg F Inlet Air Temperature, Air Flow Rate: 3200 scfm, 60 to 150 psig Air Pressure,-40 deg F Dew Point Temperature, 40 to 120 deg F Maximum Temperature, Activated Alumina Desiccant, 121 in Overall Height, 97 in Overall Width, 126 in Overall Depth

Air Flow Rate      :      3200 scfm
Air Pressure      :      60 to 150 psig
Desiccant Material      :      Activated Alumina
Dew Point Temperature      :      -40 deg F
Inlet Air Temperature      :      40 to 120 deg F
Inlet Connection Size      :      6 in
Maximum Temperature      :      40 to 120 deg F
Outlet Connection Size      :      6 in
Overall Depth      :      126 in
Overall Height      :      121 in
Overall Width      :      97 in
  • Soft seated check valves for tight shut-off and durability
  • High quality pressure gauges display left tower, right tower and purge pressure
  • Function indicator LEDs for easy monitoring
  • Easy view vacuum fluorescent text display is visible under any condition
  • Energy management system advanced microprocessor based control
  • Premium quality inlet NEMA 4 construction switching/purge exhaust butterfly valves for long life on 3 in and larger
  • Towers filled with extra, high-grade activated alumina to deliver superior performance
  • Low watt density heater saves energy and prevents premature desiccant aging
  • Heavy-duty air intake filter
  • Optional EMS controlled jet blower uses A3 Purge Technology™ to reduce purge costs
  • pdfCatalog https://assets.unilogcorp.com/267/ITEM/DOC/Deltech_RP_1050_Catalog.pdf