Deltech® ZP-2200 Blower Purge Regenerative Desiccant Compressed Air Dryer, 4 in Inlet Connection, 2200 scfm Air
Deltech® ZP-2200 Blower Purge Regenerative Desiccant Compressed Air Dryer, 4 in Inlet Connection, 2200 scfm Air ZP-2200ZP Series dryers improve air system efficiency by the use of a dedicated axial blower, instead of a percentage of dehydrated purge air, to regenerate the off-line desiccant tower. ISO 8573.1 class 2 (-40 deg F/-40 deg C) dew point performance is guaranteed. ZP Series compressed air dryers will produce the design dew point while operating continuously at maximum rated flow (100% duty cycle) at CAGI ADF 200 inlet standards of 100 deg F inlet temperature and 100% relative humidity at 100 psig. Blower purge-type regenerative compressed air dryers are an economical and reliable way to dry compressed air to dew points below the freezing point of water. Desiccant dryers lower the dew point of compressed air by adsorbing the water vapor present in the compressed air onto the surface of the desiccant. Adsorption continues until equilibrium is reached between the partial pressure of the water vapor in the air and that on the surface of the desiccant. These dryers continuously process compressed air by using two identical towers, each containing a desiccant bed. While one tower is on-stream drying, the other tower is off-stream being regenerated (reactivated, i.e. dried out). The towers are alternated on and off-stream so that dry desiccant is always in contact with the wet compressed air. In this way a continuous supply of dry air downstream of the dryer is possible. The switching from one tower to the other is controlled by a solid state controller on either a fixed time basis (standard) or a demand basis (optional).
Deltech® Blower Purge Regenerative Desiccant Compressed Air Dryer, 4 in Inlet Connection, 4 in Outlet Connection, 40 to 120 deg F Inlet Air Temperature, Air Flow Rate: 2200 scfm, 60 to 150 psig Air Pressure,-40 deg F Dew Point Temperature, 40 to 120 deg F Maximum Temperature, Activated Alumina Desiccant, 85 in Overall Height, 104 in Overall Width, 124 in Overall Depth
Air Flow Rate | : | 2200 scfm |
Air Pressure | : | 60 to 150 psig |
Desiccant Material | : | Activated Alumina |
Dew Point Temperature | : | -40 deg F |
Inlet Air Temperature | : | 40 to 120 deg F |
Inlet Connection Size | : | 4 in |
Maximum Temperature | : | 40 to 120 deg F |
Outlet Connection Size | : | 4 in |
Overall Depth | : | 124 in |
Overall Height | : | 85 in |
Overall Width | : | 104 in |