(888) 979-5190 Toll-Free
Donaldson® 1C486004 IDI_132489

Donaldson 1C486004 Filter Element, P 0035 (OEM)

Donaldson® 1C486004 Filter Element, DF Connection, 25 um, 7 barg Pressure, Polyethylene Filter Media, 3.31 in OAH

Donaldson® 1C486004 Filter Element, DF Connection, 25 um, 7 barg Pressure, Polyethylene Filter Media, 3.31 in OAH 1C486004

Donaldson® P particle filter elements are designed for the removal of solid contaminants in gases. The P pre-filter elements utilize a highly porous sintered polyethylene media for absolute filtration of particles down to 25 um in size. The primary filtration mechanism of this media is sieving, which captures most particles near the surface allowing for regeneration of the element and reduced operating cost through fewer element change outs. Although the P element is primarily used as a particulate pre-filter, a simple reversal of flow through the element allows the P to be used as an effective coarse coalescing filter element, removing bulk quantities of water and oil from an air or gas stream (standard housings are equipped with an internal float drain, so no special equipment is required).
Donaldson® Filter Element, Model: P, DF Connection, 0035 Element, 25 um, 7 barg, 149 deg F Operating, Polyethylene Filter Media, 1.93 in ID, 3.31 in Overall Height

Connection Type      :      DF
Element Size      :      0035
Filter Media      :      Polyethylene
Micron Rating      :      25 um
Model      :      P
Operating Temperature      :      149 deg F
Outside Diameter      :      1.93 in
Overall Height      :      3.31 in
Pressure Rating      :      7 barg
  • Void volume - porosity grade 45%
  • Removal of contaminants down to 25 um
  • Regenerative
  • High dirt holding capacity, lower differential pressure
  • Absolute retention grade
  • Economical, longer service lifetime
  • pdfCatalog https://assets.unilogcorp.com/267/ITEM/DOC/Donaldson_1C486004_Catalog.pdf
  • pdfSpecification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Donaldson_1C486004_Specification_Sheet.pdf