Donaldson 1C486084 Filter Element, P 1100 (OEM)

Donaldson® P particle filter elements are designed for the removal of solid contaminants in gases. The P pre-filter elements utilize a highly porous sintered polyethylene media for absolute filtration of particles down to 25 um in size. The primary filtration mechanism of this media is sieving, which captures most particles near the surface allowing for regeneration of the element and reduced operating cost through fewer element change outs. Although the P element is primarily used as a particulate pre-filter, a simple reversal of flow through the element allows the P to be used as an effective coarse coalescing filter element, removing bulk quantities of water and oil from an air or gas stream (standard housings are equipped with an internal float drain, so no special equipment is required).
Donaldson® Filter Element, Model: P, DF Connection, 1100 Element, 25 um, 7 barg, 149 deg F Operating, Polyethylene Filter Media, 18.35 in ID, 5.16 in Overall Height

• Void volume - porosity grade 45%
• Removal of contaminants down to 25 um
• Regenerative
• High dirt holding capacity, lower differential pressure
• Absolute retention grade
• Economical, longer service lifetime

• Catalog https://assets.unilogcorp.com/267/ITEM/DOC/Donaldson_1C486004_Catalog.pdf
• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Donaldson_1C486084_Specification_Sheet.pdf