Donaldson 1C486085 Element B 1100 (OEM)

Donaldson® B particle filter elements are designed for the removal of particulate contaminants in gases. The B pre-filter elements utilize a highly porous sintered media for absolute filtration of particles down to 25 um in size. The primary filtration mechanism of this media is sieving, which captures most particles near the surface allowing for regeneration of the element and reduced operating cost through fewer element change outs. Although the B element is primarily used as a particulate pre-filter, a simple reversal of flow through the element allows the B element to be used as an effective coarse coalescing filter element, removing bulk quantities of water and oil from an air or gas stream (standard housings are equipped with an internal float drain, so no special equipment is required). The high grade sintered bronze media ensures not only a high load capacity of contaminants, but also long life through its resistance to aggressive condensates and its ability to be regenerated many times.
Donaldson® Filter Element, Model: B, DF Connection, 1100 Element, 25 um, 7 barg, 149 deg F Operating, Sintered Bronze Filter Media, 18.35 in ID, 5.16 in Overall Height

• The B series filter element contains a highly porous sinter bronze filter medium
• Coarse solid and liquid particles are removed down to a 99.98% efficiency at 25 um particles, Donaldson® B elements are used in our DF compressed air housing
• Void volume - porosity grade larger than 60% - high dirt holding capacity lower differential pressure
• Repeatable regeneration possible, combined with exact retention rates - economical, longer service lifetime

• Catalog https://assets.unilogcorp.com/267/ITEM/DOC/Donaldson_1C486005_Catalog.pdf
• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Donaldson_1C486085_Specification_Sheet.pdf