Donaldson 1C580224-63 Dryer, UP0010-60STD, Desiccant, Heatless (OEM)

The Ultrapure 2000 breathing air systems are purifi cation units based on adsorption dryers Ultrapac® 2000 to supply breathing air in excess of all relevant international standards and medical prescriptions. The purification consists of several stages - compressed air is led through the inlet of the unit (J) and across the pre filter (2). At this stage, the air is cleaned from particles and condensate. The condensate is removed via a membrane condensate drain (5). The following desiccant dryer reduces the water vapor content of the compressed air down to a pressure dew point of -40 deg C (equivalent to a remaining water content of 0.11 g/cu-m ). In the following purification stages (SP, AK, OX) (9) the content of CO2 is adsorbed to a level far below 500 ppm the content of SO2 below 1 ppm and the content of NOX below 2 ppm. In the AK stage oil vapors, hydrocarbons, taste and odors are adsorbed to a level far below 0.003 mg/cu-m. In the OX stage a catalyst converts CO to CO2 and thereby reduces the carbon monoxide level down below 5 ppm. The final particle filter (3) removes all particles which might be carried over from the adsorption and/or catalyst stages.
Donaldson® Heatless Adsorption Dryer, Ultrapure 2000 Standard Series, 110 VAC, 1/2 in Inlet Connection, FNPT Inlet Connection, 59 to 225 psi Air Pressure, -40 deg C Dew Point Temperature, 39 to 126 deg F Maximum Temperature, 34.02 in Overall Height, 12.01 in Overall Width, 5 in Overall Depth

• Purification package including adsorption dryer, CO-, CO2 -, NOX - and SO2 removal, pre, after filter and automatic condensate drain
• Guaranteed and validated separation efficiency
• Desiccant in cartridges
• Compact, space saving design
• Component exchange display
• Unique multi-function block

• Catalog https://assets.unilogcorp.com/267/ITEM/DOC/Donaldson_1C580208_63_Catalog.pdf
• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Donaldson_1C580224_63_Specification_Sheet.pdf