F200 Activated Alumina Desiccant - 3/16 in. (300 lb. Fiber Drum)

Description 3/16" (4-8mm) bead activated aluminais used when pressure drop and surface area requirements fallbetween 1/8" and 1/4" material. It is suitable for most systems.Activated alumina is a porous form of aluminum oxide. It has a highsurface area which adsorbs vapors without any change in form. If size is not known or specified,the 1/8" (2-5mm) size is usually satisfactory. However, ifactivated alumina is used in a regenerative dryer and the desiccantretaining screens cannot be measured, the 1/4" (5-10mm) size shouldbe used as a bed support (6" layer). The industry-standard activatedalumina desiccant is used extensively in compressed air dryers.Activated alumina is for use in both heated compressed air dryersand heatless / pressure swing compressed air dryers. Dewpointsto -40°F and lower may be achieved with activated alumina dependingon dryer design and operating conditions. F-200 is a smooth sphereof activated alumina produced by the unique manufacturingprocess. F-200 is an excellent desiccant fordrying a wide variety of liquids and gases. Although all moleculesare adsorbed to some extent on F-200 activated alumina, thosemolecules having the highest polarity are preferentially absorbed.Stream conditions such as pressure, concentration and molecularweight of the molecules, temperature and site competing moleculesaffect the efficiency of adsorption. MSDS Download Desiccant Material Safety Data Sheet(MSDS) Typical Properties Bead Size 3/16" (4.8 mm) Color White Surface Area 360m 2 /gram Pore Volume .05cc/ gram Bulk Density 48 lbs./ft3 769 kg/m3 Crush Strength 30 lbs.( 14kgs) Abrasion Loss .1 wt% Static Sorption @ Relative Humidity % 11% RH 8 @ 58% RH 22 @ 97% RH 42
ISS is an independent supplier of aftermarket replacement parts and is not affiliated with manufacturers mentioned in this listing. Original equipment manufacturer (OEM) names are the trademarks of each manufacturer. On products marked "equivalent", "replacement", or "aftermarket", OEM names and part numbers are for reference only.

• Meets Or Exceeds OEM Specifications
• Cost Effective Solution To OEM Parts
• Using Aftermarket Parts Will Not Void Your Warranty
• OEM Names And Part Numbers Are For Reference Only