(888) 979-5190 Toll-Free
KINGSTON 114-2-030 1279168

Kingston 114-2-030 Safety Valve with Lever

KINGSTON 114-2-030 Safety Relief Valve, Vent to Atmosphere, 1/4 in Nominal, NPT Connection, 25 cfm, -20 to 400 deg F

KINGSTON 114-2-030 Safety Relief Valve, Vent to Atmosphere, 1/4 in Nominal, NPT Connection, 25 cfm, -20 to 400 deg F 114-2-030

KINGSTON model 114 ASME code soft seat safety valves are constructed of brass with a FKM seal and positive stop for a bubble tight seal. This valve is also equipped with a protective stem cover and manual test lever. Internal construction and performance are the same as model 115 differing only by the test lever. The KINGSTON model 114 ASME code soft seat safety valve, like every KINGSTON safety valve, is set and tested at factory for quality and dependability. Set pressure range 25 to 300 psi (5 psi increments only). Steam rated 35 to 50 psi only. Maximum temperature -20 to 400 deg F.
KINGSTON Safety Relief Valve, Model: 114, Vent to Atmosphere Style, 1/4 in Nominal, NPT Connection, 30 psi Pressure Rating, 25 cfm Flow Rate, Air, Gas Media, Lever Actuator, 0.219 sq-in Orifice, Brass Body, Soft Seat, Brass Stem, Vinyl Seal, Trim Material: Carbon Steel Roll Pin/Music Wire/Stainless Steel Spring, Cold Rolled Steel Handle, FKM O-Ring/Seat Washer Softgoods, -20 to 400 deg F, 3-1/4 in H Dimensions

Actuator Type      :      Lever
Body Material      :      Brass
Connection Type      :      NPT
Dimensions      :      3-1/4 in H
Flow Rate      :      25 cfm
Handle Material      :      Cold Rolled Steel
Media      :      Air, Gas
Model      :      114
Nominal Size      :      1/4 in
Orifice Size      :      0.219 sq-in
Pressure Rating      :      30 psi
Seal Material      :      Vinyl
Seat Type      :      Soft
Softgoods Material      :      FKM O-Ring/Seat Washer
Stem Material      :      Brass
Style      :      Vent to Atmosphere
Temperature Rating      :      -20 to 400 deg F
Trim Material      :      Carbon Steel Roll Pin/Music Wire/Stainless Steel Spring
  • FKM O-ring provides soft seat performance
  • Precision machined hard, positive stop
  • Lever for manual testing
  • ASME/NB certified - stamped UV + NB
  • pdfSpecification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/KINGSTON_114_2_025_Specification_Sheet.pdf