Pneumatech PAM-005 Air-Cooled Aftercooler (945 SCFM)
Pneumatech PAM-005 Air Cooled Aftercooler, 115 VAC, 1 ph-Phase, 945 cfm Air Flow, 250 psig Inlet Air, Steel
Pneumatech PAM-005 Air Cooled Aftercooler, 115 VAC, 1 ph-Phase, 945 cfm Air Flow, 250 psig Inlet Air, Steel PAM-005- Brand Name: Pneumatech
- PN: PAM-005
- Min. Order Qty: 1
- Qty. Interval: 1
- Click for Availability
-
$1273.00
Add To Favorites ListCompressed air will always be saturated with water when it leaves a compressor, but outlet temperature has an important influence on the water load that goes into your dryer. To minimize the load and thus size of the downstream refrigeration or adsorption dryer, it is highly recommended to install an aftercooler. Aftercoolers are an integral component in any compressed air system. By cooling the compressed air the majority of the systems moisture can be removed. It is highly recommended to include an aftercooler in your compressed air system to increase the longevity of your equipment and your tools.
Pneumatech Air Cooled Aftercooler, Series: PAM, 115 VAC, 60 Hz, 1 ph Phase, 1/12 hp Motor HP Rating, 945 cfm Air Flow Capacity, 250 psig Inlet Air Pressure, 1 in NPT Inlet Port, ODP Enclosure, Floor, Suspended Mounting, 350 deg F, Steel, Enamel, 42.18 in L x 26.11 in W x 2.83 in D
| Air Flow Capacity | : | 945 cfm |
| Dimensions | : | 42.18 in L x 26.11 in W x 2.83 in D |
| Enclosure Type | : | ODP |
| Finish | : | Enamel |
| Frequency Rating | : | 60 Hz |
| Inlet Air Pressure | : | 250 psig |
| Inlet Port Size | : | 1 in NPT |
| Material | : | Steel |
| Motor HP Rating | : | 1/12 hp |
| Mounting Type | : | Floor, Suspended |
| Phase | : | 1 ph |
| Series | : | PAM |
| Temperature Rating | : | 350 deg F |
| Voltage Rating | : | 115 VAC |
- Highly efficient axial fans
- Robust construction and compact design
- Cooling down to 18 deg F above ambient
- Easy to dismantle for cleaning
- Negligible pressure drop
- High performance