(888) 979-5190 Toll-Free
SOLON® 10F30 10F30

Solon 10F30 Flange Washer, Imperial, 5/8 in, 0.644 in ID, 1.146 in OD, 0.146 in Thick, Tool Steel

SOLON® 10F30 Flange Washer, Imperial, 5/8 in, 0.644 in ID, 1.146 in OD, 0.146 in Thick, Tool Steel

SOLON® 10F30 Flange Washer, Imperial, 5/8 in, 0.644 in ID, 1.146 in OD, 0.146 in Thick, Tool Steel 10F30

Certain industries that utilize piping flange joint assemblies, such as petrochemical, dictate a low tolerance for fugitive emissions. Flange live loading, which is a process imperative to controlling gasket leaks in piping and refining operations, depends on the mission-critical performance. It is estimated that up to 92% of all flange leaks are caused by insufficient or loss of bolt preload. Solon brand Flange Washers are designed to maintain sufficient bolt tension and resultant gasket stresses in high temperature and high-pressure applications where safety and emission containment take priority. Solon brand Flange Washers are simply Belleville springs that are designed to be used in flange applications. The springs are engineered to fit into flange designs and the loads are typically higher than standard Belleville washers. Engineered to withstand extreme temperatures as well as corrosive environments. Contact us for an engineered solution to your custom specifications and unique application requirements. Made in USA.

Additional Information      :      56.5 ft-lb Unlubricated Torque, 70.63 ft-lb Lubricated Torque
Deflection at Working Load      :      0.014 in
Flat Load      :      6780 lb
Grade      :      H-13
Height      :      0.162 in
Inside Diameter      :      0.644 in
Material      :      Tool Steel
Nominal Size      :      5/8 in
Outside Diameter      :      1.146 in
System of Measurement      :      Imperial
Thickness      :      0.146 in
Working Load      :      6780 lb
  • Once installed, they don't have to be retorqued
  • Eliminate the effects of differential thermal expansion
  • Increase the elasticity of the bolting system by a factor of 7 to 15X
  • Economical alternative to costly system enhancements
  • Maintain bolt integrity by maintaining the contact pressure between the flange and gasket surfaces
  • Comprehensive risk analysis - contact a SOLON® application engineer for a detailed application review