(888) 979-5190 Toll-Free
Sullivan Palatek D-20 D-20

Sullivan Palatek D-20 Industrial Electric Air Compressor

SP D-20 Industrial Electric Air Compressor, 1.52 gal Tank, 20 hp, 125 psi, 80.2 cfm

SP D-20 Industrial Electric Air Compressor, 1.52 gal Tank, 20 hp, 125 psi, 80.2 cfm D-20

Engineered to be both dependable and versatile, the D Series industrial electric direct drive rotary screw air compressor is one of many energy efficient solutions developed by Sullivan-Palatek. The D Series compressors are offering a range of 15 to 40 hp. They are equipped with an easily readable microprocessor, a coupling and air end mounted to the motor C-face. It utilizes a sizeable oversized separator element and sump tank as well as easily replaceable oil & air intake filters. With their compact size and high reliability, these machines are ideal for smaller industrial settings such as automotive shops, small machining facilities and fabrication facilities. The D Series compressors utilize many easily accessible parts, making the overall cost of ownership much lower than many of our competitors.
SP Industrial Electric Air Compressor, Series: D, 20 hp, 60 Hz, 1.52 gal Tank, 125 psi, 80.2 cfm Flow Rate, 1750 rpm, Direct Drive, 61 in Overall Length, 30 in Overall Width, 38 in Overall Height

Drive Type      :      Direct
Flow Rate      :      80.2 cfm
Frequency Rating      :      60 Hz
HP Rating      :      20 hp
Overall Height      :      38 in
Overall Length      :      61 in
Overall Width      :      30 in
Pressure Rating      :      125 psi
Series      :      D
Speed Rating      :      1750 rpm
Tank Capacity      :      1.52 gal
  • Microprocessor controller with sequencer, lead-lag and remote monitoring for up to 8 machines
  • Motor with totally enclosed fan-cooled (TEFC) enclosure type for indoor and outdoor use
  • The motor starter has a water-tight, dust-tight, sleet-resistant NEMA 4 enclosure for indoor and outdoor use
  • The air end, manufactured by Sullivan-Palatek, has advanced rotor design features; oversize radial thrust bearings and precision working rotary screws that provide virtually no wear
  • Coupling and drive - the compressor is flange mounted to motor C-face for positive alignment and directly coupled for increased efficiency
  • Cooling system equipped with double pass air-cooled aftercooler with thermostatic control for maintaining the appropriate oil operating temperature to within 15 deg of ambient
  • Using oversized coolers allows for greater cooling performance at high temperatures
  • Oversized dry type air intake filter with easily replaceable elements
  • One-piece lube fill elbow and level sight glass, a vented cap for pressure release when removing
  • Inlet/check valve features a one-piece housing for dependable performance and complete modulation
  • pdfCatalog https://assets.unilogcorp.com/267/ITEM/DOC/SP_D_15_Catalog.pdf