(888) 979-5190 Toll-Free
TTP 65655-65 IDI_186608

Thermal Transfer 65655-65 Thermal Bypass Valve

TTP 65655-65 Thermal Bypass Valve, #16 Nominal, Die Cast Aluminum Body, 5.44 in L x 3.51 in W x 2.62 in H

TTP 65655-65 Thermal Bypass Valve, #16 Nominal, Die Cast Aluminum Body, 5.44 in L x 3.51 in W x 2.62 in H 65655-65

This thermal bypass valve is ideally suited for hydrostatic drive circuits which require fast warm-up, controlled fluid temperature and low return line back pressure. When installed in the return line of a hydraulic circuit that employs an oil cooler, this device will modulate fluid temperature by either shifting return line flow through the cooler or bypassing directly to the reservoir. A built-in pressure relief function automatically relieves excess pressure to the reservoir should the cooler become restricted and resultant pressure drop become too high for the cooler circuit.
TTP Thermal Bypass Valve, #16 Nominal, SAE End, 65 psi, 60 gpm Flow Rate, Mineral Base Hydraulic Fluid Media, Die Cast Aluminum Body, -30 to 195 deg F, 5.44 in L x 3.51 in W x 2.62 in H

Body Material      :      Die Cast Aluminum
Dimensions      :      5.44 in L x 3.51 in W x 2.62 in H
End Type      :      SAE
Flow Rate      :      60 gpm
Media      :      Mineral Base Hydraulic Fluid
Nominal Size      :      #16
Pressure Rating      :      65 psi
Temperature Rating      :      -30 to 195 deg F
  • pdfSpecification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/TTP_65654_65_Specification_Sheet.pdf