(888) 979-5190 Toll-Free
Toshiba 0016SDBC42A-P 0016SDBC42A-P

Toshiba 0016SDBC42A-P Brake Motor, 1 HP, 1200 RPM, 575V, 145TC Frame, TEFC

Toshiba EQP Global® 0016SDBC42A-P Brake Motor, 575 V, 1.5 A, 1 hp, 1200 rpm Speed, 0.75 kW, 3 ph -Phase, 60 Hz

Toshiba EQP Global® 0016SDBC42A-P Brake Motor, 575 V, 1.5 A, 1 hp, 1200 rpm Speed, 0.75 kW, 3 ph -Phase, 60 Hz 0016SDBC42A-P

Toshiba's totally enclosed fan cooled, EQP Global Brake Motor series meets the requirements of a wide range of holding-duty brake applications. The robust design and premium construction exceed most industry standards, extend operating life, and aim to minimize maintenance and downtime. The EQP Global Brake Motor series is equipped with a range of enhanced features, including an IP55 rating that protects against moisture and contaminants entering the enclosure. The heavy-duty cast-iron frame and brackets as well as the corrosion-resistant paint system make it a preferred choice for severe environments. In addition, it is suitable for horizontal or vertical applications. Manufactured with a commitment to quality, the EQP Global Severe Duty series delivers exceptional performance and reliability in demanding applications.

Toshiba Brake Motor, Model: EQP Global®, 575V, 1.5 Amp, 1 HP, 1200 rpm, 0.75 kW, 3-Phase, 60Hz, TEFC Motor Enclosure, 145TC Frame, 0.875 in Dia x 2.25 in L Shaft, CCW/CW Rotation, 1 Speed, 6305ZZC3 Bearing, 5-7/8 in Bolt Circle Diameter, 6 Poles, Severe, Insulation Class: Class F, NEMA Premium® Efficiency Motor Efficiency Group, 82.5 % Efficiency, 1.15 Service Factor, 65.6 % Power Factor, C-Face Footed Mounting, Cast Iron, 40 deg C, 18.4 in L x 7.7 in H, Additional Information: 1.41 in L x 0.187 in W Keyway

Additional Information      :      1.41 in L x 0.187 in W Keyway
Amperage Rating      :      1.5 A
Bearing Type      :      6305ZZC3
Bolt Circle Diameter      :      5-7/8 in
Dimensions      :      18.4 in L x 7.7 in H
Duty Type      :      Severe
Efficiency      :      82.5 %
Frame Size      :      145TC
Frequency Rating      :      60 Hz
HP Rating      :      1 hp
Insulation Class      :      Class F
Material      :      Cast Iron
Model      :      EQP Global®
Motor Efficiency Group      :      NEMA Premium® Efficiency
Motor Enclosure Type      :      TEFC
Mounting Type      :      C-Face Footed
Number of Poles      :      6
Number of Speeds      :      1
Phase      :      3 ph
Power Factor      :      65.6 %
Power Rating      :      0.75 kW
Rotation Type      :      CCW/CW
Service Factor      :      1.15
Shaft Size      :      0.875 in Dia x 2.25 in L
Speed Rating      :      1200 rpm
Temperature Rating      :      40 deg C
Voltage Rating      :      575 V
  • Totally Enclosed Fan Cooled
  • Holding Duty
  • NEMA Premium® Efficiency
  • 60 Hz: 230/460 or 575 V
  • 50 Hz: 190/380 V
  • Three-Phase
  • Dual Frequency 50/60 Hz Design
  • 1.15 Service Factor
  • Class F Insulation; Inverter Duty, Exceeds NEMA MG1 Part 31
  • IP55 Protection
  • All Cast Iron Construction
  • Multi-Mount Capabilities on Most Frames (See Appendix C)
  • V-Ring Seal on Drive End
  • Brake Ratings 15 lb. ft. and Below Suitable for Vertical Mounting
  • See Appendix D for ASD Capabilities
  • Non-USMCA Qualified
  • pdfCatalog https://assets.unilogcorp.com/267/ITEM/DOC/Toshiba_0014SDBA41A_P_Catalog.pdf
  • pdfSpecification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Toshiba_0016SDBC42A_P_Specification_Sheet.pdf