(888) 979-5190 Toll-Free
Toshiba 0024SDGC41A-P 0024SDGC41A-P

Toshiba 0024SDGC41A-P Cooling Tower Motor, 2 HP, 1800 RPM, 575V, 145T Frame, TEFC

Toshiba EQP Global® 0024SDGC41A-P Cooling Tower Motor, 575 V, 2.4 A, 2 hp, 1800 rpm Speed, 1.5 kW, 3 ph -Phase, 60 Hz

Toshiba EQP Global® 0024SDGC41A-P Cooling Tower Motor, 575 V, 2.4 A, 2 hp, 1800 rpm Speed, 1.5 kW, 3 ph -Phase, 60 Hz 0024SDGC41A-P

Toshiba's totally enclosed, EQP Global Cooling Tower motor series meets the requirements of the hot and humid environments of cooling tower applications. The robust design and premium construction are available in TEFC and TEAO designs. The EQP Global Cooling Tower series is equipped with a range of enhanced features making it suitable for operation conditions with 100% humidity, including a double seal arrangement providing an IP56 rating that protects against moisture and contaminants entering the enclosure. The heavy-duty cast-iron frame and brackets make it a preferred choice for severe environments. Oversized 300 series bearings on both ends are double shielded, greased for life, requiring minimal maintenance. In addition, a severe duty epoxy paint system is resistant to water, dirt and corrosion. Manufactured with a commitment to quality, the EQP Global Cooling Tower series delivers exceptional performance and reliability in demanding applications.

Toshiba Cooling Tower Motor, Model: EQP Global®, 575V, 2.4 Amp, 2 HP, 1800 rpm, 1.5 kW, 3-Phase, 60Hz, TEFC Motor Enclosure, 145T Frame, 0.875 in Dia x 2.23 in L Shaft, CCW/CW Rotation, 1 Speed, 6305ZZC3 Bearing, 4 Poles, Severe, Insulation Class: Class F, NEMA Premium® Efficiency Motor Efficiency Group, 86.5 % Efficiency, 1.15 Service Factor, 74.7 % Power Factor, Footed Mounting, Cast Iron, Finish: Epoxy-Paint, 40 deg C, 13.2 in L x 7.7 in H, Additional Information: 1.41 in L x 0.007 in W Keyway

Additional Information      :      1.41 in L x 0.007 in W Keyway
Amperage Rating      :      2.4 A
Bearing Type      :      6305ZZC3
Dimensions      :      13.2 in L x 7.7 in H
Duty Type      :      Severe
Efficiency      :      86.5 %
Finish      :      Epoxy-Paint
Frame Size      :      145T
Frequency Rating      :      60 Hz
HP Rating      :      2 hp
Insulation Class      :      Class F
Material      :      Cast Iron
Model      :      EQP Global®
Motor Efficiency Group      :      NEMA Premium® Efficiency
Motor Enclosure Type      :      TEFC
Mounting Type      :      Footed
Number of Poles      :      4
Number of Speeds      :      1
Phase      :      3 ph
Power Factor      :      74.7 %
Power Rating      :      1.5 kW
Rotation Type      :      CCW/CW
Service Factor      :      1.15
Shaft Size      :      0.875 in Dia x 2.23 in L
Speed Rating      :      1800 rpm
Temperature Rating      :      40 deg C
Voltage Rating      :      575 V
  • API 661 Compliant
  • Totally Enclosed Fan Cooled or Totally Enclosed Air Over
  • Severe Duty
  • NEMA Premium® Efficiency
  • 60 Hz: 230/460 or 575 V
  • 50 Hz: 190/380 V
  • Three-Phase
  • Dual-Frequency 50/60 Hz Design
  • Class F Insulation; Inverter Duty, Exceeds NEMA MG1 Part 31
  • IP56 Protection
  • Cast Iron Frame, Bearing Brackets and Conduit Box
  • Multi-Mount Capabilities on All Frames (See Appendix C)
  • Epoxy Finished Paint
  • Multiple Drain Provisions for Horizontal and Vertical Mounting
  • See Appendix D for ASD and Division 2 Capabilities
  • Non-USMCA Qualified
  • pdfCatalog https://assets.unilogcorp.com/267/ITEM/DOC/Toshiba_0014SDBA41A_P_Catalog.pdf
  • pdfSpecification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Toshiba_0024SDGC41A_P_Specification_Sheet.pdf