(888) 979-5190 Toll-Free
Toshiba 0106XDSC44A-P 0106XDSC44A-P

Toshiba 0106XDSC44A-P General Purpose Motor, 10 HP, 1200 RPM, 575V, 256TC Frame, TEFC

Toshiba EQP Global® 841 0106XDSC44A-P General Purpose Motor, 575 V, 10.8 A, 10 hp, 1200 rpm Speed, 7.5 kW, 3 ph -Phase

Toshiba EQP Global® 841 0106XDSC44A-P General Purpose Motor, 575 V, 10.8 A, 10 hp, 1200 rpm Speed, 7.5 kW, 3 ph -Phase 0106XDSC44A-P

Toshiba's totally enclosed fan cooled, NEMA Premium®, EQP Global 841 motor series is designed to meet and exceed the requirements of the petrochemical industry 841 specification. The robust design and premium construction extend operating life and aim to minimize maintenance and downtime. The EQP Global 841 series is equipped with a range of enhanced features, including labyrinth seals on both ends, which provide an IP56 rating that protects against moisture and contaminants entering the enclosure. The complete heavyduty cast-iron construction makes it a preferred choice for severe environments. Oversized 300 series bearings on both ends enhance the bearing life and make it suitable for direct couple or belt drive systems. In addition, the low operating temperatures contribute to extending the insulation's durability and overall life. Manufactured with a commitment to quality, the EQP Global 841 series delivers exceptional performance and reliability in demanding applications.

Toshiba General Purpose Motor, Model: EQP Global® 841, 575V, 10.8 Amp, 10 HP, 1200 rpm, 7.5 kW, 3-Phase, 60Hz, TEFC Motor Enclosure, 256TC Frame, 1.625 in Dia x 3.94 in L Shaft, CCW/CW Rotation, 1 Speed, 6309C3 Bearing, 7-1/4 in Bolt Circle Diameter, 6 Poles, Petro-Chemical, Insulation Class: Class F, NEMA Premium® Efficiency Motor Efficiency Group, 91 % Efficiency, 1.15 Service Factor, 80.2 % Power Factor, C-Face Footless Mounting, Cast Iron, 40 deg C, 25.1 in L, Additional Information: 2.91 in L x 0.375 in W Keyway

Additional Information      :      2.91 in L x 0.375 in W Keyway
Amperage Rating      :      10.8 A
Bearing Type      :      6309C3
Bolt Circle Diameter      :      7-1/4 in
Dimensions      :      25.1 in L
Duty Type      :      Petro-Chemical
Efficiency      :      91 %
Frame Size      :      256TC
Frequency Rating      :      60 Hz
HP Rating      :      10 hp
Insulation Class      :      Class F
Material      :      Cast Iron
Model      :      EQP Global® 841
Motor Efficiency Group      :      NEMA Premium® Efficiency
Motor Enclosure Type      :      TEFC
Mounting Type      :      C-Face Footless
Number of Poles      :      6
Number of Speeds      :      1
Phase      :      3 ph
Power Factor      :      80.2 %
Power Rating      :      7.5 kW
Rotation Type      :      CCW/CW
Service Factor      :      1.15
Shaft Size      :      1.625 in Dia x 3.94 in L
Speed Rating      :      1200 rpm
Temperature Rating      :      40 deg C
Voltage Rating      :      575 V
  • Totally Enclosed Fan Cooled
  • Severe Duty, Petrochemical
  • NEMA Premium® Efficiency
  • 60 Hz: 460 or 575 V
  • Three-Phase
  • 1.15 Service Factor
  • Footed, C-Face Footed and C-Face Footless Design
  • NEMA Design B
  • Class F Insulation; Inverter Duty, Exceeds NEMA MG1 Part 31
  • IP56 Protection
  • All Cast Iron Construction
  • Multi-Mount Capabilities on All Frames (See Appendix C)
  • Multiple Drain Provisions for Horizontal and Vertical Mounting
  • Oversized 300 Series Bearings
  • Labyrinth Seal on All Frames (DE and ODE)
  • 100% No-Load Commercial Test and Vibration Test on All Motors
  • See Appendix D for ASD and Division 2 Capabilities
  • pdfCatalog https://assets.unilogcorp.com/267/ITEM/DOC/Toshiba_0014SDBA41A_P_Catalog.pdf
  • pdfSpecification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Toshiba_0106XDSC44A_P_Specification_Sheet.pdf