(888) 979-5190 Toll-Free
Toshiba 1/24FNSR31H-P 1/24FNSR31H-P

Toshiba 1/24FNSR31H-P General Purpose Motor, 0.5 HP, 1800 RPM, 230/460V, 56 Frame, TENV

Toshiba EQP Global® SD 1/24FNSR31H-P General Purpose Motor, 230/460 V, 1.4/0.7 A, 0.5 hp, 1800 rpm Speed, 3 ph -Phase

Toshiba EQP Global® SD 1/24FNSR31H-P General Purpose Motor, 230/460 V, 1.4/0.7 A, 0.5 hp, 1800 rpm Speed, 3 ph -Phase 1/24FNSR31H-P

Toshiba's totally enclosed fan cooled, EQP Global Severe Duty motor series meets the requirements of a wide range of general purpose industrial applications. The robust design and premium construction exceed most industry standards, extend operating life, and aim to minimize maintenance and downtime. The EQP Global SD series is equipped with a range of enhanced features, including an IP55 rating that protects against moisture and contaminants entering the enclosure. The heavy-duty cast-iron frame and brackets make it a preferred choice for severe environments. Oversized 300 series bearings on both ends enhance the bearing life and make it suitable for direct couple or belt drive systems. In addition, the low operating temperatures contribute to extending the insulation's durability and overall life. Manufactured with a commitment to quality, the EQP Global Severe Duty series delivers exceptional performance and reliability in demanding applications.

Toshiba General Purpose Motor, Model: EQP Global® SD, 230/460V, 1.4/0.7 Amp, 0.5 HP, 1800 rpm, 3-Phase, 60Hz, TENV Motor Enclosure, 56 Frame, 0.625 in Dia x 1.88 in L Shaft, CCW/CW Rotation, 1 Speed, 4 Poles, Severe, Insulation Class: Class F, NEMA Premium® Efficiency Motor Efficiency Group, 84 % Efficiency, 1.15 Service Factor, Footed Mounting, Cast Iron, 40 deg C, 11.68 in L x 7.95 in H, Additional Information: 1.378 in L x 0.1875 in W Keyway

Additional Information      :      1.378 in L x 0.1875 in W Keyway
Amperage Rating      :      1.4/0.7 A
Dimensions      :      11.68 in L x 7.95 in H
Duty Type      :      Severe
Efficiency      :      84 %
Frame Size      :      56
Frequency Rating      :      60 Hz
HP Rating      :      0.5 hp
Insulation Class      :      Class F
Material      :      Cast Iron
Model      :      EQP Global® SD
Motor Efficiency Group      :      NEMA Premium® Efficiency
Motor Enclosure Type      :      TENV
Mounting Type      :      Footed
Number of Poles      :      4
Number of Speeds      :      1
Phase      :      3 ph
Rotation Type      :      CCW/CW
Service Factor      :      1.15
Shaft Size      :      0.625 in Dia x 1.88 in L
Speed Rating      :      1800 rpm
Temperature Rating      :      40 deg C
Voltage Rating      :      230/460 V
  • Totally Enclosed Fan Cooled
  • Severe Duty
  • NEMA Premium® Efficiency
  • 60 Hz: 230/460, 460, or 575 V
  • 50 Hz: 190/380 or 380 V
  • Three-Phase
  • Dual Frequency 50/60 Hz Design
  • 1.15 Service Factor
  • Footed, C-Face Footed, C-Face Footless, and Top Mount Design
  • NEMA Design B
  • Class F Insulation; Inverter Duty, Exceeds NEMA MG1 Part 31
  • IP55 Protection
  • Cast Iron Frame, Bearing Brackets, and Conduit Box
  • Multi-Mount Capabilities on Most Frames (See Appendix C)
  • Multiple Drain Provisions for Horizontal and Vertical Mounting
  • Oversized 300 Series Bearings
  • 100% No-Load Commercial Test per IEEE 112 on All Motors
  • See Appendix D for ASD and Division 2 Capabilities
  • pdfCatalog https://assets.unilogcorp.com/267/ITEM/DOC/Toshiba_0014SDBA41A_P_Catalog.pdf
  • pdfSpecification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Toshiba_1_24FNSR31H_P_Specification_Sheet.pdf