(888) 979-5190 Toll-Free
Toshiba 1504SDSA41A-P 1504SDSA41A-P

Toshiba 1504SDSA41A-P General Purpose Motor, 150 HP, 1800 RPM, 230/460V, S445T Frame, TEFC

Toshiba EQP Global® SD 1504SDSA41A-P General Purpose Motor, 230/460 V, 336/168 A, 150 hp, 1800 rpm Speed, 3 ph -Phase

Toshiba EQP Global® SD 1504SDSA41A-P General Purpose Motor, 230/460 V, 336/168 A, 150 hp, 1800 rpm Speed, 3 ph -Phase 1504SDSA41A-P

Toshiba's totally enclosed fan cooled, EQP Global Severe Duty motor series meets the requirements of a wide range of general purpose industrial applications. The robust design and premium construction exceed most industry standards, extend operating life, and aim to minimize maintenance and downtime. The EQP Global SD series is equipped with a range of enhanced features, including an IP55 rating that protects against moisture and contaminants entering the enclosure. The heavy-duty cast-iron frame and brackets make it a preferred choice for severe environments. Oversized 300 series bearings on both ends enhance the bearing life and make it suitable for direct couple or belt drive systems. In addition, the low operating temperatures contribute to extending the insulation's durability and overall life. Manufactured with a commitment to quality, the EQP Global Severe Duty series delivers exceptional performance and reliability in demanding applications.

Toshiba General Purpose Motor, Model: EQP Global® SD, 230/460V, 336/168 Amp, 150 HP, 1800 rpm, 3-Phase, 60Hz, TEFC Motor Enclosure, S445T Frame, 3-3/8 in Dia x 8-1/2 in L Shaft, CCW/CW Rotation, 1 Speed, 4 Poles, Severe, Insulation Class: Class F, NEMA Premium® Efficiency Motor Efficiency Group, 95.8 % Efficiency, 1.15 Service Factor, Footed Mounting, Cast Iron, 40 deg C, 49 in L x 23.6 in H, Additional Information: 6.91 in L x 0.875 in W Keyway

Additional Information      :      6.91 in L x 0.875 in W Keyway
Amperage Rating      :      336/168 A
Dimensions      :      49 in L x 23.6 in H
Duty Type      :      Severe
Efficiency      :      95.8 %
Frame Size      :      S445T
Frequency Rating      :      60 Hz
HP Rating      :      150 hp
Insulation Class      :      Class F
Material      :      Cast Iron
Model      :      EQP Global® SD
Motor Efficiency Group      :      NEMA Premium® Efficiency
Motor Enclosure Type      :      TEFC
Mounting Type      :      Footed
Number of Poles      :      4
Number of Speeds      :      1
Phase      :      3 ph
Rotation Type      :      CCW/CW
Service Factor      :      1.15
Shaft Size      :      3-3/8 in Dia x 8-1/2 in L
Speed Rating      :      1800 rpm
Temperature Rating      :      40 deg C
Voltage Rating      :      230/460 V
  • Totally Enclosed Fan Cooled
  • Severe Duty
  • NEMA Premium® Efficiency
  • 60 Hz: 230/460, 460, or 575 V
  • 50 Hz: 190/380 or 380 V
  • Three-Phase
  • Dual Frequency 50/60 Hz Design
  • 1.15 Service Factor
  • Footed, C-Face Footed, C-Face Footless, and Top Mount Design
  • NEMA Design B
  • Class F Insulation; Inverter Duty, Exceeds NEMA MG1 Part 31
  • IP55 Protection
  • Cast Iron Frame, Bearing Brackets, and Conduit Box
  • Multi-Mount Capabilities on Most Frames (See Appendix C)
  • Multiple Drain Provisions for Horizontal and Vertical Mounting
  • Oversized 300 Series Bearings
  • 100% No-Load Commercial Test per IEEE 112 on All Motors
  • See Appendix D for ASD and Division 2 Capabilities
  • pdfCatalog https://assets.unilogcorp.com/267/ITEM/DOC/Toshiba_0014SDBA41A_P_Catalog.pdf
  • pdfSpecification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Toshiba_1504SDSA41A_P_Specification_Sheet.pdf