(888) 979-5190 Toll-Free
Toshiba 2008XSSC41A-R 2008XSSC41A-R

Toshiba 2008XSSC41A-R General Purpose Motor, 200 HP, 900 RPM, 575V, S449T Frame, TEFC

Toshiba EQP Global® 840 2008XSSC41A-R General Purpose Motor, 575 V, 201 A, 200 hp, 900 rpm Speed, 3 ph -Phase, 60 Hz

Toshiba EQP Global® 840 2008XSSC41A-R General Purpose Motor, 575 V, 201 A, 200 hp, 900 rpm Speed, 3 ph -Phase, 60 Hz 2008XSSC41A-R

Toshiba's totally enclosed fan cooled, EQP Global 840 motor series is designed to meet most of the 841 specification as a cost-effective alternative. The robust design and premium construction extend operating life and aim to minimize maintenance and downtime. The EQP Global 840 series is equipped with a range of enhanced features, including a double shaft sealed arrangement for 324-365T frames and labyrinth seals on both ends for frames 404T and above, which provide an IP56 rating that protects against moisture and contaminants entering the enclosure. The complete heavy-duty cast-iron construction makes it a preferred choice for severe environments. Oversized 300 series bearings on both ends enhance the bearing life and make it suitable for direct couple or belt drive systems. In addition, the low operating temperatures contribute to extending the insulation's durability and overall life. Manufactured with a commitment to quality, the EQP Global 840 series delivers exceptional performance and reliability in demanding applications.

Toshiba General Purpose Motor, Model: EQP Global® 840, 575V, 201 Amp, 200 HP, 900 rpm, 3-Phase, 60Hz, TEFC Motor Enclosure, S449T Frame, 3-3/8 in Dia x 8-1/4 in L Shaft, CCW/CW Rotation, 1 Speed, 8 Poles, Mill and Chemical, Insulation Class: Class F, NEMA Premium® Efficiency Motor Efficiency Group, 94.5 % Efficiency, 1.15 Service Factor, Footed Mounting, Cast Iron, 40 deg C, 60-1/2 in L, Additional Information: 6.91 in L x 0.875 in W Keyway

Additional Information      :      6.91 in L x 0.875 in W Keyway
Amperage Rating      :      201 A
Dimensions      :      60-1/2 in L
Duty Type      :      Mill and Chemical
Efficiency      :      94.5 %
Frame Size      :      S449T
Frequency Rating      :      60 Hz
HP Rating      :      200 hp
Insulation Class      :      Class F
Material      :      Cast Iron
Model      :      EQP Global® 840
Motor Efficiency Group      :      NEMA Premium® Efficiency
Motor Enclosure Type      :      TEFC
Mounting Type      :      Footed
Number of Poles      :      8
Number of Speeds      :      1
Phase      :      3 ph
Rotation Type      :      CCW/CW
Service Factor      :      1.15
Shaft Size      :      3-3/8 in Dia x 8-1/4 in L
Speed Rating      :      900 rpm
Temperature Rating      :      40 deg C
Voltage Rating      :      575 V
  • Totally Enclosed Fan Cooled
  • Severe Duty, Mill, and Chemical
  • NEMA Premium® Efficiency
  • 60 Hz: 460 or 575 V
  • 50 Hz: 380 V
  • Three-Phase
  • Dual Frequency 50/60 Hz Design
  • 1.15 Service Factor
  • Footed, C-Face Footed and C-Face Footless Design
  • NEMA Design B
  • Class F Insulation; Inverter Duty, Exceeds NEMA MG1 Part 31
  • IP55 or IP56 Protection
  • All Cast Iron Construction
  • Multi-Mount Capabilities on Most Frames (See Appendix C)
  • Multiple Drain Provisions for Horizontal and Vertical Mounting
  • Double Shaft Seal Arrangement 324T-365T Frame (DE and ODE)
  • Oversized 300 Series Bearings
  • Labyrinth Seal 404T Frame and Larger (DE and ODE)
  • 100% No-Load Commercial Test per IEEE 112 on All Motors
  • pdfCatalog https://assets.unilogcorp.com/267/ITEM/DOC/Toshiba_0014SDBA41A_P_Catalog.pdf
  • pdfSpecification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Toshiba_2008XSSC41A_R_Specification_Sheet.pdf