(888) 979-5190 Toll-Free
Transair® 6602 50 00 6602 50 00

Transair 6602 50 00 90 deg Elbow, 2 in Push-Fit x 2 in Push-Fit, Aluminum

Transair® 6602 50 00 90 deg Elbow, 2 in Push-Fit x 2 in Push-Fit, Aluminum

Transair® 6602 50 00 90 deg Elbow, 2 in Push-Fit x 2 in Push-Fit, Aluminum 6602 50 00

Transair® fittings for aluminum pipe install fast and with minimal tooling. All Transair® fittings are designed to securely fit around Transair® aluminum pipe, increasing system efficiency and preventing compressed air leaks. Transair® fittings come in a variety of styles for easy assembly and layout design of compressed air, vacuum and industrial/inert gas systems. All Transair® components can integrate into existing copper or steel systems, allowing for easy expansion of an existing system. The "full bore" design of Transair® fittings, paired with the low coefficient of friction in the aluminum pipe ensures optimal flow throughout the compressed air system. All fittings are 100% recyclable, silicone-free and made from materials with no propagation of flame. All fittings conform to the UL94HB standard. Parker Hannifin warrants all Transair® components to be free of defects in material and workmanship for 10 years from the date of installation. Transair® 2 in (50 mm) and 2-1/2 in (63 mm) fittings use snap ring technology. With a snap ring fitting, a polyamide retaining ring is inserted into 2 holes at the end of the pipe. This ring, along with tightening the fitting nuts with a spanner wrench, prevents the fitting from coming off the pipe. All 2 in and 2-1/2 in pipes come from the factory with the snap ring holes pre-drilled, but if field cutting is required, the snap rings holes need to be drilled using a Transair® Drill Jig.
Transair® 90 deg Elbow, 90 deg Elbow Fitting, 2 in Connection Size 1, Push-Fit Connection Type 1, 2 in Connection Size 2, Push-Fit Connection Type 2, Push-Fit|Push-Fit Connection, Aluminum, Aluminum Material Construction, 80 mm Dia, 232 psi Maximum Operating Pressure, -4 to 185 deg F Operating, Additional Information: Nitrile/Polyamide Seal Material

Additional Information      :      Nitrile/Polyamide Seal Material
Connection Size 1      :      2 in
Connection Size 2      :      2 in
Connection Type 1      :      Push-Fit
Connection Type 2      :      Push-Fit
Connection Type      :      Push-Fit|Push-Fit
Dimensions      :      80 mm Dia
Fitting Type      :      90 deg Elbow
Material Construction      :      Aluminum
Material      :      Aluminum
Maximum Operating Pressure      :      232 psi
Operating Temperature      :      -4 to 185 deg F
  • Quick-connection technology
  • Modular and reusable
  • Corrosion-resistant
  • Full bore design
  • Optimum flow rate
  • Faster installation
  • Lower installation costs
  • Immediate pressurization
  • Lightweight