(888) 979-5190 Toll-Free
Transair® 6662 50 25 6662 50 25

Transair 6662 50 25 Lightweight Quick Assembly Bracket With 1 in Drop Outlet, 5-3/16 in L, 3-7/8 in W

Transair® 6662 50 25 Lightweight Quick Assembly Bracket With 1 in Drop Outlet, 5-3/16 in L, 3-7/8 in W

Transair® 6662 50 25 Lightweight Quick Assembly Bracket With 1 in Drop Outlet, 5-3/16 in L, 3-7/8 in W 6662 50 25

Transair® Drops brackets make installing drops lines in an existing compressed air or industrial/inert gas system quick and easy. To install a drop bracket, you only need a drill, Transair® drill bit (dependent on the bracket being installed) and a Transair® drilling jig to precisely drill the hole. Transair® offers multiple styles of brackets to fit the space requirements of the existing system. For scenarios where the compressed air system cannot be shut down for modifications, Parker Transair® offers the pressurized system (Hot Tap) bracket that can be installed under pressure. When installing the drop brackets, Parker suggests drilling the hole at the top of the pipe to prevent moisture and debris from entering the drop line. Drilling the hole on the top can be avoided with the use of the quick assembly bracket. Due to the placement of the seal, the quick assembly bracket can be installed in the side of the pipe and still prevent moisture and debris from entering the drop line. The pressurized system bracket requires a hot tap drill (pn: EA98 06 00) to install the bracket into a pressurized compressed air line. The full bore design of Transair® drop brackets, paired with the low coefficient of friction in the aluminum pipe ensures optimal flow throughout the compressed air system. All drop brackets are 100% recyclable, silicone-free and made from materials with no propagation of flame. All drop brackets conform to the UL94HB standard. Parker Hannifin warrants all Transair® components to be free of defects in material and workmanship for 10 years from the date of installation.
Transair® Lightweight Quick Assembly Bracket With 1 in Drop Outlet, 2 in Maximum Pipe Diameter, Reinforced Fiberglass, 1.73 in Center-to-Center Length, 5-3/16 in Length, 3-7/8 in Width

Center-to-Center Length      :      1.73 in
Length      :      5-3/16 in
Material      :      Reinforced Fiberglass
Maximum Pipe Diameter      :      2 in
Width      :      3-7/8 in
  • Quick connection technology
  • Modular and reusable
  • Corrosion-resistant
  • Optimum flow rate
  • 100% recyclable
  • Faster installation
  • Lower installation costs
  • Immediate pressurization
  • pdfSpecification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Transair_6662_50_25_Specification_Sheet.pdf
  • videoVideo Link https://videos.parker.com/vidad/publish.vidavee.com/publish/Parker/CC425F99BC46FF369F722F43F6C677C8.mp4