(888) 979-5190 Toll-Free
WEG 01536ET3H254TC-S 01536ET3H254TC-S

WEG 01536ET3H254TC-S General Purpose Motor

WEG 01536ET3H254TC-S General Purpose Motor, 575 V, 13.9 A, 15 hp, 3525 rpm Speed, 11 kW, 3 ph -Phase, 60 Hz

WEG 01536ET3H254TC-S General Purpose Motor, 575 V, 13.9 A, 15 hp, 3525 rpm Speed, 11 kW, 3 ph -Phase, 60 Hz 01536ET3H254TC-S

WEG General Purpose Motor, 575 V, 13.9 A, 15 hp, 3525 rpm, 11 kW, 3 ph Phase, 60 Hz, IC411 TEFC, IP55 Motor Enclosure, 254/6TC Frame, 1-5/8 in Dia x 4 in L Shaft, CW, CCW Rotation, Ball Bearing, 7.252 in Bolt Circle Diameter, 2 Poles, Continuous, Direct On Line Starting Method, Class F Insulation Class, NEMA Premium® Efficiency Motor Efficiency Group, 91 % Efficiency, 1.15 Service Factor, 0.87 Power Factor, C-Face Flange, W-6 Foot Mounting, Rolled Steel, Matte, Black, -20 to 40 deg C, 22.559 in L x 13.189 in W x 12.835 in H

Amperage Rating      :      13.9 A
Bearing Type      :      Ball
Bolt Circle Diameter      :      7.252 in
Color      :      Black
Dimensions      :      22.559 in L x 13.189 in W x 12.835 in H
Duty Type      :      Continuous
Efficiency      :      91 %
Finish      :      Matte
Frame Size      :      254/6TC
Frequency Rating      :      60 Hz
HP Rating      :      15 hp
Insulation Class      :      Class F
Material      :      Rolled Steel
Motor Efficiency Group      :      NEMA Premium® Efficiency
Motor Enclosure Type      :      IC411 TEFC, IP55
Mounting Type      :      C-Face Flange, W-6 Foot
Number of Poles      :      2
Phase      :      3 ph
Power Factor      :      0.87
Power Rating      :      11 kW
Rotation Type      :      CW, CCW
Service Factor      :      1.15
Shaft Size      :      1-5/8 in Dia x 4 in L
Speed Rating      :      3525 rpm
Starting Method      :      Direct On Line
Temperature Rating      :      -20 to 40 deg C
Voltage Rating      :      575 V
  • Aluminum end shields
  • Internal bolts, giving a clean surface to the motor, avoiding trapping materials and allowing easy paint job after assembly to the load if required
  • New ventilation system for improved thermal performance
  • Robust feet design suitable for tougher applications
  • Oversized diagonally split aluminum terminal box that exceeds IP55 requirements
  • Terminal box rotatable in 90 deg increments for flexibility during installation
  • Color-coded leads as standard for easy wiring
  • IP55 ingress protection as standard, being appropriate for severe environments
  • Suitable for VFD operation as per NEMA MG1 part 31.4.4.2
  • Motor frame painting system 500 hr salt spray-resistant
  • Cast iron flanges for improved strength (182/4TC and larger)
  • New and more robust eyebolts design (frames 182/4T and up) plus a second eyebolt on non-drive end allowing vertical lifting capability (frames 213/5T and 254/6T)
  • Bearing cap as standard on flanged motor
  • Left position terminal box
  • Without overload protector
  • pdfCatalog https://assets.unilogcorp.com/267/ITEM/DOC/WEG_1218OS1B48CH_S_Catalog.pdf